AirFit F40 Setup and Review – Everything you need to know

  • By Clay Rollyson
  • /
  • /
ResMed is the leader in the sleep therapy world, and CPAP masks are no exception to that. They have now launched the AirFit F40 Full Face. This is a minimal contact full face mask which are very popular today. In this blog we will introduce you to all the details of the F40. From setup and fitting to maintenance and our comparison and review of the F40. Now, let’s jump right in on those details.

AirFit F40 Fitting Guide

Getting a good start on any mask is the most important factor. A bad start or bad fitting at the beginning will lead to bad outcomes on the mask. With the F40 getting it fitted right will allow you to find out if it is a good fit for you. The single biggest thing to remember on this mask is that it seals UNDER the nose and over the mouth. We have had many customers trying to get the seal over the bridge of their nose, and that is not what this mask is designed to do. Now let’s look at the proper way to get a great fit on the F40 step by step.

AirFit F40 Fitting process:

  1. Twist and pull both magnetic clips away from the frame magnets.
  2. Place the F40 cushion under your nose and ensure it sits comfortably against your face. With the ResMed logo on the headgear facing out, pull the F40 headgear over your head. The top headgear strap should sit on top of your head and not too far forward or back.
  3. Bring the lower headgear straps under your ears and attach the magnetic clips to the frame.
  4. If the mask needs adjusting, undo the fastening tabs on the upper headgear straps and pull evenly. Repeat with the lower headgear straps.

AirFit F40 Cleaning Instructions:

Keeping up with your mask will improve the longevity and dramatically improve the performance. The AirFit F40 mask cushion should be maintained daily, and the entire F40 assembly needs to be maintained weekly. If you stay on track with this process, you will see much better comfort and performance over a much longer period of time.
  1. Soak the components in warm water with a mild liquid detergent like CPAP Soap. Ensure that there are no air bubbles while soaking.
  2. Shake the components vigorously in the water and hand wash with a soft bristle brush. Pay particular attention to the vent holes in the QuietAir/Multi-hole vent ring.
  3. Thoroughly rinse the components under running water.
  4. Squeeze the fabric components to remove excess water.
  5. Leave the components to air dry out of direct sunlight. If the mask components are not visibly clean, repeat the cleaning steps.
  6. Make sure that the vents and anti-asphyxia valves are clean and clear. This flap can get a little sticky if not kept clean.

AirFit F40 Sizing Options:

The AirFit F40 is in many ways the newest version of the F30. One huge issue with the F30 was that there was no large size. The new F40 not only has added a large cushion option, but also has a small and large headgear option. Those improvements give the F40 a 98% fit range according to ResMed’s fitting study.
  • F40 Cushion Sizes: Small/Wide, Medium, and Large. Use this fitting template here to see which size F40 Cushion works best for you.
  • F40 Headgear Sizes: Small, Standard, and Large. Most of the time you will have a standard F40 headgear included with your mask, but if it is too loose or too tight, then you can go with the small or large option for a better fit.

F40 Review and Comparison:

To me the F40 is the upgraded version of the F30 by ResMed. I say this because the F40 is very similar to the F30 and the obvious transition from 3 to 4 in the name pretty much defines that. That mean that many of the positives on the F40 are what you might call upgrades from the F30. The F30 has been super popular and so an upgraded or 2.0 version (ie: F40) is certainly worth a hard look for CPAP users.

AirFit F40 Pros:

  • Much better fit and seal– The AdaptiSeal cushion is super-flexible and does a really nice job of contouring to your unique face.
  • Simpler headgear– The new headgear on the F40 only has 4 points of adjustment as opposed to the 5 points on the F30. Much easier to fit and adjust. It is also very soft and comfortable.
  • Fully Flexible frame– What good is the flexible cushion if it were installed in a rigid frame. That is why the F40 introduced a very flexible frame that will also allow for a much more comfortable fit. It also makes it very durable and hard to break.
  • Very nice exhalation diffuser– The QuietAir exhalation ring makes the F40 very quiet and makes the draft almost nothing.

AirFit F40 Cons:

  • Front of nose leak– The F30 had some minor reporting of leaks at the front of the nose on the cushion. The F40 has a similar fit and in demos of the F40 performance did show that on my wife specifically. It fit me great with no leaks, but she could not get it to seal for her.
  • Bridge on nasal opening can be weird– Some users have reported that the bridge in the middle of the nasal opening can block a nostril at times. Not an issue we hear terribly often, but it has been reported.

 
Continue reading...

Luna TravelPAP Travel CPAP – Setup and Review

  • By Clay Rollyson
  • /
  • /
If you are considering a Travel CPAP to simplify your life, then you should definitely take a look at the new Luna TravelPAP. It is the latest addition to the Travel CPAP options out there today. It is made by React Health, also known as 3B. They have been making reliable Home CPAPs for a while now and will now be offering this option for Travel CPAP. In this blog we will go over all of the details on this new Travel CPAP as well as our review to how it compares to other options.

Luna TravelPAP Details:

The TravelPAP has a very unique look. I have compared it to more of a bluetooth speaker or noise maker look. It certainly does not look like a CPAP with the unique pill-like setup. On one end of the unit is your air outlet for attachment of any standard CPAP tube and on the other end the air intake where you have a disposable filter. From end to end the TravelPAP measures 6.26″. It is 2.6″ deep and 2.8″ tall. So, it takes up very little room on a nightstand or in a bag. It only weighs 14 ounces or 0.88lbs. Definitely helpful in a limited weight or space travel situation. Below I will detail the other unique specifications on the Luna TravelPAP.

Luna TravelPAP Specifications:

  • Size: 6.26″ x 2.6″ x 2.8″ and weighing 0.88lbs.
  • Noise level: About 30 dB (A) depending on pressure settings.
  • Setting Options: Fixed Pressure CPAP or Auto CPAP ranging from 4-20cm
  • Warranty: 2 years on device
  • Connectivity: Bluetooth via the LightTrip app at the Google Play Store or Apple App Store.
  • Electrical: 100V – 240V, 50Hz/60Hz, 1.0A max. Input at 19V, 1.26A
  • Tube and Mask Connection: Universal CPAP tube connection (22mm) and universal CPAP mask connection.

Setup of your Luna TravelPAP:

There is likely not an easier setup than on this Luna TravelPAP CPAP. More than likely it will not take you more than a minute or two. I would even bet that it takes you more time to unpack the box than to hook it up and start using it.

What’s included with the TravelPAP:

Getting Started on the Luna TravelPAP:

  1. Connect your CPAP Tube to the side of the machine.
  2. Check the filter housing on the opposite side of the tube to make sure filter is installed.
  3. Connect your mask to the CPAP tube.
  4. Plug AC power supply into the device. Located just below the CPAP tube connection.
  5. Put on your CPAP mask and start the Luna TravelPAP by pressing the On/Off button.

Interested in purchasing Luna TravelPAP? Click here

Luna TravelPAP Maintenance:

There is VERY little maintenance on the Luna TravelPAP. Weekly you will check the filter inside of the Filter housing for discoloration. Change it at the first sign of discoloration or wear. Wipe down the unit weekly as well with a damp cloth making sure that the filter housing is clear. Outside of that you will just keep the CPAP mask and tubing cleaned weekly with normal cleaning procedures.

Connecting your Luna TravelPAP to the LightTrip App:

Once you download the LightTrip app linking it to the TravelPAP is a breeze. Follow the steps below and/or take a look at the video above to get it linked up via blueooth very easily.
  1. With your Luna TravelPAP plugged in to power press the bluetooth icon on the top of the unit. Once you press the icon it should start blinking.
  2. Now open your LightTrip app and press the bluetooth icon in the top left of the app.
  3. Now select your serial number from the list of available connections.
  4. Your bluetooth light on top of the TravelPAP should go solid white and the app should switch to your main screen showing your settings and controls.

CPAPmyway Review of Luna TravelPAP:

We always get pretty excited about new CPAPs, and Travel CPAPs are especially cool. The Luna TravelPAP is no exception to that. Out of the box it has a very cool look. Nothing like a CPAP machine at all. There are not true buttons or screens to make it look medical. If you didn’t know what it was, then you might think it is a speaker or something. Below I have some details on what I found to be cool features as well as where I thought we have some room to improve.

Luna TravelPAP Pros:

  • App worked great: With some bluetooth connected things it can be a little wonky. This unit connected to the LightTrip app really quick and easy. The app was very user friendly, and even the clinical menu navigation was easy from the app.
  • Normal noise level: Nothing out of the ordinary on noise level. As with all Travel CPAPs, there is more noise than with a home CPAP, but not bad at all.
  • Really simple: Not a whole lot easier than this unit. Hook it up and go to sleep. One little filter to check weekly.
  • Auto On worked great: Sometimes you feel like you need to work hard breathing to get the Auto On feature to kick in on your CPAP. This one was super-sensitive and was running within a breath or two for me.
  • Universal Connection: No adapters needed to connect standard tubing or any CPAP mask.

Luna TravelPAP Cons:

  • No Accessories: The only power option would be the DC power cord, but there is no battery option or HME designed to work with the TravelPAP. You can use generic HMEs or a Generic Battery like the Portable Outlet, but nothing has been specifically designed for the TravelPAP.
  • Tube and power connection: I really don’t like when the tube and power cord plug in the same side. Makes for weird nightstand setups and operation. This unit is not alone in this setup though. Seems to be common amongst other Travel CPAP options.
  • No humidifier system: As with all the other Travel CPAPs, the TravelPAP does not have a heated humidifier option. HME is the only humidity choice.
  • No Bipap option: If you are on Bipap, then this unit will not work for you. That is also a common issue amongst all other Travel CPAP options.
   
Continue reading...