ResMed AirTouch F40 Review: New Fabric Full Face CPAP Mask
By Clay RollysonResMed just released the AirTouch F40, and it's the mask a lot of our customers have been asking for: the tiny, under-the-nose AirFit F40 frame, paired with ResMed's soft ComfiSoft fabric cushion. I've now filmed a full hands-on review where I crank the pressure from 10 to 20 cm, swap in the silicone AirFit F40 cushion for a side-by-side, and share how my wife did after sleeping in it. Watch the video below, then keep reading for everything we learned.
My full AirTouch F40 review: sizing, assembly, cleaning, a live 10–20 cm pressure test, and my wife's overnight verdict.
Quick take
- What it is: A minimal-contact full face mask with a fabric-fused silicone cushion that sits under your nose.
- Why it matters: You get the stability of a silicone cushion with the soft, breathable feel of fabric on your skin. It's the only fabric option in this front-connection minimal-contact style right now.
- Pressure test: It sealed perfectly at 10 cm H₂O. At 20 cm it still held a decent seal, with a small leak up by the nose. Best for moderate pressures.
- Exhalation: Almost silent, with no draft I could feel, and even leaks are quieter than with silicone.
- Mixed real-world results: I loved it, but my wife fought slow leaks at her cheeks overnight, even though she loved the feel.
- Already on the AirFit F40? The AirTouch cushion snaps onto the same frame and headgear, so you can try it by buying just the AirTouch F40 cushion.
Try the new AirTouch F40 risk-free with our 30-day mask exchange.
Shop AirTouch F40Table of Contents
- What is the AirTouch F40?
- Who the AirTouch F40 is for
- Pressure test: how well does fabric seal?
- Fabric vs. silicone at the same fit
- My wife's overnight review
- Comfort and low profile
- Fitting and sizing tips
- Quick-release elbow and short tube
- Already using the AirFit F40?
- Cleaning the ComfiSoft cushion
- Things to know before you buy
- AirTouch F40 vs. AirFit F40 vs. AirTouch F30i
- Which AirTouch F40 product do you need?
- FAQ
What is the AirTouch F40?
The AirTouch F40 is a full face CPAP mask from ResMed that blends the UltraCompact design of the AirFit F40 with a fabric-fused silicone cushion. The cushion sits under your nose and around your mouth, so nothing rests on the bridge of your nose.
The key is the ComfiSoft cushion. It's a fabric layer fused to a silicone body that uses ResMed's AdaptiSeal technology. The silicone gives the cushion its structure, so it keeps its shape and holds a seal, while the fabric is what actually touches your skin. ResMed describes the fabric as soft, breathable, and moisture-wicking, and that matches my experience. The whole mask feels a lot like wearing your favorite old T-shirt.
The cushion itself is pretty much identical to the one on the AirTouch F30i. ResMed has just put it on the F40 frame, so you get a standard front-of-mask tube connection instead of the F30i's top-of-head connection.
If you're wondering about durability: the AirTouch F30i uses the same fabric-and-silicone idea and has been out for a long time. I was honestly nervous the two layers might separate over time, and we just haven't seen it. The fabric is pressed onto the silicone so well it's almost like one piece.
Who the AirTouch F40 is for
- People with skin irritation from silicone. You keep the stability of a silicone cushion, but the part touching your face is fabric. If you like minimal-contact masks and have had issues with silicone, this one is a no-brainer to try.
- AirTouch F30i fans who didn't love the frame. If you liked the fabric, minimal-contact feel of the AirTouch F30i but not the bulkier frame, the over-the-head tube connection, and the tubes running down the sides of your face, this is going to solve those problems for you.
- Current AirFit F40 users who want something softer without relearning a new mask.
- Moderate-pressure users. If your pressure is around 14–15 cm H₂O or below, comfort is where this mask really shines.
- People with a light-sleeping bed partner. Exhalation is nearly silent, and leaks are quieter too.
- Readers, TV watchers, and glasses wearers. The frame curves around your eyes and leaves a clear line of sight.
Pressure test: how well does fabric seal?
The big question with any fabric cushion is whether it can handle the pressure. So in the video, I fit the mask, started my CPAP at 10 cm H₂O (a pretty average pressure), and then cranked it all the way to 20.
Keep in mind I was sitting up for this test, not lying down with my face in a pillow, and this is my first run-through on a brand-new mask. Here's what happened:
At 10 cm H₂O
Sealed perfectly. No exhalation draft at all. I couldn't even feel my exhale with my hand right over the mask.
At 20 cm H₂O
A decent seal, better than I expected, but it was leaking a little up by the nose.
Exhalation noise
Almost silent. There are no pronounced vent holes on the exhalation ring, so there's very little draft or sound.
One thing I really liked: even the leaks were quieter. Because the cushion is fabric, you don't get that loud flapping noise silicone can make when it leaks at higher pressures. For a bed partner, that's a nice bonus.
My pressure recommendation: If your pressure is above about 14–15 cm H₂O, I'd be cautious with this mask, and maybe with the AirTouch line in general. These masks are geared more toward comfort than high-end sealing performance. At moderate pressures, the comfort is hard to beat.
Fabric vs. silicone at the same fit
Out of curiosity, I left the headgear tension exactly the same and swapped in the all-silicone AirFit F40 cushion to see if it did any better at high pressure. The difference was pretty distinct:
- Silicone sealed better. It felt more secure on my face at the higher pressure.
- Fabric was much more comfortable. Switching to the silicone, it genuinely felt like my face was being pressed harder.
My takeaway: if you're at a moderate pressure, the comfort of the fabric cushion easily outweighs the extra sealing power of silicone. If you're at a higher pressure, the AirFit F40 silicone cushion may be the safer bet. And since both cushions fit the same frame, you can always keep one of each.
My wife's overnight review
I always want to give you the honest truth, so here it is: my wife, Caitlin, tested the AirTouch F40 for a few nights, and she didn't love it.
Here's what she told me:
- She loved the feel. It was comfortable and left no lines on her face at all.
- It sealed fine when she went to bed, but she woke up throughout the night with leaks around the sides of her cheeks.
- The leaks were quiet. I sleep right beside her, I wake up easily, and I never noticed them.
This isn't a knock on the AirTouch line. She regularly switches between the AirTouch F20 and the AirTouch F30i, and the F30i uses a very similar, if not the same, cushion. We've also had a lot of great reviews on the F30i from customers.
My own results were very positive, so I still think this mask is worth a shot for a lot of people. But it's a good reminder that every face is different, and the best mask for one person isn't always the best mask for the next. That's exactly why we offer a 30-day mask exchange: if it doesn't work for you, we'll swap it for one you like.
Want to hear from Caitlin directly? Leave a comment on the YouTube video. If enough of you ask, I'll get her on camera for her own review and try-on.
Comfort and low profile
This is a very low-profile mask, and it's very small on the face. A few things make it comfortable to wear all night:
- Fabric on the frame. It's not just fabric on your nose and mouth. The flexible frame has soft fabric lining where it runs along your cheeks.
- Light, thin headgear. It's extremely soft, and it's the same headgear used on the AirFit F40.
- No nose bridge pressure. The under-the-nose cushion keeps everything off the bridge of your nose.
- Magnetic clips. They're very simple and make putting the mask on and taking it off very easy.
The one thing I didn't love: the "wings" that run up the sides of the nose are pretty pronounced, just like on the AirFit F40. They help the seal, but they can get a little pinchy. With the pressure on, the cushion expands and it's better, but when I wear it with no air flowing, it can feel a little harder to breathe through my nose. Most people get used to this quickly, but it's worth knowing.
Fitting and sizing tips
The AirTouch F40 comes with three cushion sizes available: Small/Wide, Medium, and Large. All three cushion sizes fit the same standard frame. The headgear also comes in small, standard, and large. Almost every mask ships with the standard headgear, and it fits the vast majority of people. ResMed says the mask is designed to fit 96% of people.
Fitting is simple:
- Unclip both magnetic clips from the frame. If it's your first time, keep them apart. They love to grab each other.
- Place the cushion under your nose and over your mouth.
- Pull the headgear from the ResMed logo over the back of your head.
- Bring the lower straps behind your ears and reattach them to the frame with the magnetic clips.
- Tighten against your nose first, evenly on both sides, using the upper straps. Then snug the lower straps against your mouth.
My #1 fitting tip: Be careful with the bottom straps. If you overtighten them, they pull the nose part of the cushion away from your nostrils, and that can cause leaks. Get the upper straps right first, then just snug the bottom straps.
A few other fit notes:
- No top-of-head adjustment. Unlike a lot of minimal-contact masks, the F40 headgear doesn't have a strap that adjusts across the top of your head, so headgear size matters more. If the standard headgear sits right down on your ears, you need the small. If you can't get it buckled, go with the large.
- Finding your cushion size. ResMed likes to hide it. The size (SW, M, or L) is on the left side of the mask (when it's on your face), right behind the blue magnet connection point. That's where to look when you're reordering parts.
- Longer hair. ResMed recommends feeding your hair through the back of the headgear. A ponytail should sit high enough to fit through the back.
- AirSense mask setting. On a ResMed AirSense machine, set the mask type to Pillows for the AirTouch F40.
Quick-release elbow and short tube
The quick-release elbow is awesome. If you get up to use the bathroom in the middle of the night, pop the elbow and short tube off and you can breathe normally through the wide-open hole in the cushion. A lot of masks with quick disconnects make you breathe through a small anti-asphyxia flap, and you end up sucking air through it. This isn't like that at all.
The short tube is nice and gives you good freedom of movement, and the swivel at the bottom is very smooth.
Already using the AirFit F40? You can try this with just a cushion
This is one of my favorite things about the AirTouch F40. The AirTouch and AirFit F40 cushions both fit the same frame, and the headgear is the same too.
So if you're already on the AirFit F40, you don't need a whole new mask to try the fabric version. Just pick up an AirTouch F40 cushion in your size and snap it onto the frame you already have. It's an inexpensive way to get the feel of a whole different style of mask. You can also switch back and forth between the AirFit F40 silicone cushion and the AirTouch fabric cushion whenever you want.
The cushion pops in and out with ease. Soft silicone buds on the cushion pop into a hole on each side of the frame, so there's nothing to bend, break, or crack. Each new cushion also comes with the exhalation ring already installed.
New to the F40 altogether? Check out my AirFit F40 setup and review, since the frame, headgear, and fitting are the same.
Cleaning the ComfiSoft cushion
Cleaning is pretty much the same as the silicone version: warm water and a mild soap, and ResMed recommends cleaning the cushion daily. The big difference is no brushes or anything abrasive that could tear the fabric. Just hand wash it. Our CPAP Soap is a really good option for this cushion in particular.
- Remove the cushion from the frame. The QuietAir vent ring comes installed, but it removes very easily if you want to clean it separately.
- Submerge it in warm, drinking-quality water with a mild liquid soap, making sure no air bubbles are trapped.
- Hand wash gently. Don't use a brush on the fabric.
- Rinse thoroughly under running water.
- Squeeze out the excess water and let it air dry on a towel, out of direct sunlight.
Tip: Wash it in the morning so it has all day to air dry. You don't want to put on a wet fabric cushion at bedtime. If washing every single day is too much, CPAP mask wipes are a good way to keep it fresh between full washes.
This is what makes the fabric AirTouch masks (the N30i, F30i, and F40) different from the older AirTouch foam masks (the N20 and F20). The foam cushions should never get wet, but the ComfiSoft fabric cushions are meant to be washed.
Already have an AirFit F40? Add the soft AirTouch cushion.
Shop AirTouch F40 CushionThings to know before you buy
- Higher pressures. It sealed perfectly for me at 10 cm and had a small leak at 20. If your pressure is above about 14–15 cm H₂O, the silicone AirFit F40 may seal better for you.
- Results vary from face to face. It worked great for me, while my wife had overnight cheek leaks. Our 30-day mask exchange takes the risk out of trying it.
- The bridge across the nose opening. People either love it or hate it. It adds stability and keeps the cushion from shifting as much, but if the cushion drifts off center at night (especially if your nose is a little off-center, like mine), the bridge can end up across one nostril.
- AirMini users. There's no AirMini-specific adapter for the AirTouch F40 yet. To use it with an AirMini, you'll need the Universal AirMini Tube Adapter and a standard CPAP tube. It works with any home CPAP as-is.
- Magnets. The headgear clips are magnetic, and there isn't a non-magnetic option for the F40 yet. If you have a pacemaker or another implant that magnets can affect, check the ResMed user guide warnings and talk to your doctor. If you need a non-magnetic fabric option, the AirTouch F30i cushion fits our non-magnetic F30i frame.
- No fit pack yet. There's no fit pack with multiple cushion sizes right now. My ResMed rep tells me the message is getting through and fit packs may be coming, possibly starting with this mask. In the meantime, our 30-day mask exchange lets you swap sizes.
- Mask setting. Set your AirSense mask type to Pillows.
AirTouch F40 vs. AirFit F40 vs. AirTouch F30i
| Feature | AirTouch F40 | AirFit F40 | AirTouch F30i |
|---|---|---|---|
| Cushion | ComfiSoft fabric fused to silicone | AdaptiSeal silicone | ComfiSoft fabric fused to silicone |
| Cushion style | Under the nose | Under the nose | Under the nose |
| Tube connection | Front of mask, short tube | Front of mask, short tube | Top of head |
| Frame | Small, flexible, fabric lining on cheeks | Small, flexible | Larger, fabric-wrapped |
| Feel vs. seal (my test) | Softer and more comfortable; best at moderate pressures | Firmer feel; more secure seal at high pressure | Same soft cushion feel as AirTouch F40 |
| Cushions interchangeable | Yes, with AirFit F40 | Yes, with AirTouch F40 | With AirFit F30i frames |
| Non-magnetic option | Not yet | Not yet | Yes (non-magnetic frame) |
| Cleaning | Daily, hand wash, no brush | Daily, soft brush OK | Daily, hand wash, no brush |
Which AirTouch F40 product do you need?
Complete mask
New to the F40? This includes the frame, ComfiSoft cushion with QuietAir vent, elbow, short tube, and headgear.
Shop the maskCushion only
Already have an AirFit F40 or AirTouch F40 frame? Just add the fabric cushion. Available in Small/Wide, Medium, and Large.
Shop the cushionFrame with cushion
Includes the frame, cushion with QuietAir vent, elbow, and short tube. Reuse the headgear you already have.
Shop the frameHeadgear
The same headgear fits both the AirFit F40 and the AirTouch F40, in small, standard, and large.
Shop the headgearAirMini adapter
Using the AirTouch F40 with an AirMini? Pair this adapter with a standard CPAP tube.
Shop the adapterCleaning supplies
Gentle CPAP Soap for daily hand washing, plus mask wipes for in-between days.
Shop mask wipesAirTouch F40 FAQ
Does the AirTouch F40 cushion fit the AirFit F40 frame?
Yes. The AirTouch F40 and AirFit F40 cushions both fit the same frame, and they use the same headgear. If you already have an AirFit F40, you can try the AirTouch version by buying just the AirTouch F40 cushion.
What is the difference between the AirTouch F40 and the AirFit F40?
The cushion. The AirFit F40 uses an all-silicone cushion, while the AirTouch F40 uses a ComfiSoft cushion with soft fabric fused to a silicone body. The frame, headgear, elbow, and short tube design are the same. In my side-by-side test, the silicone sealed more securely at high pressure, but the fabric was noticeably more comfortable.
Does the AirTouch F40 work at high CPAP pressures?
In my test it sealed perfectly at 10 cm H₂O and held a decent seal at 20 cm with a small leak near the nose. If your pressure is above about 14–15 cm H₂O, I'd be cautious, since the AirTouch line is geared more toward comfort than maximum seal. The silicone AirFit F40 may be a better fit at higher pressures.
Can I use the AirTouch F40 with a ResMed AirMini?
Yes, but there's no AirMini-specific adapter for it yet. You'll need the Universal AirMini Tube Adapter plus a standard CPAP tube. It works with any home CPAP machine as-is.
How do I clean the AirTouch F40 cushion?
Clean it daily with warm water and a mild liquid soap. Submerge it, hand wash it gently without a brush, rinse it well, squeeze out the excess water, and let it air dry out of direct sunlight. Washing it in the morning gives it all day to dry. Unlike the AirTouch F20 and N20 foam cushions, the fabric cushion is meant to be washed.
What sizes does the AirTouch F40 come in?
The cushion comes in Small/Wide, Medium, and Large, and all three fit the standard frame. The headgear comes in small, standard, and large. Standard fits most people. If it rests down on your ears, try small; if you can't get it buckled, try large.
Where is the size printed on the AirTouch F40 cushion?
On the left side of the cushion (when the mask is on your face), behind the blue magnet connection point on the frame. Look for SW, M, or L.
What mask setting should I use on my AirSense machine?
Set the mask type to Pillows for the AirTouch F40.
Is the AirTouch F40 quiet?
Very. The exhalation ring has no pronounced vent holes, so there's almost no draft or sound for you or your bed partner. Leaks also tend to be quieter than with an all-silicone cushion because the fabric doesn't flap.
Does the AirTouch F40 have magnets?
Yes. The headgear uses magnetic clips, and there's no non-magnetic version of the F40 yet. Magnets may interfere with certain implants or medical devices, so check the ResMed user guide and talk to your doctor if you have an implant such as a pacemaker.
Is there an AirTouch F40 fit pack?
Not right now. If the first size you pick doesn't work out, our 30-day mask exchange guarantee lets you swap it for one you like.
Can I order the AirTouch F40 without a prescription?
Yes. If we don't have a prescription on file, we'll ship your mask as individual parts so you can still get it right away. Questions? Email us at cs@cpapmyway.com or call 813-704-6038 during business hours.
Not sure the AirTouch F40 is for you? Our 30-day mask exchange has you covered.
Shop AirTouch F40About the author: Clay runs CPAPmyway in Plant City, Florida, and hosts the CPAPmyway YouTube channel, where he tests and reviews CPAP masks and machines hands-on.
- Tags:
- AirFit F40
- AirTouch
- CPAP Masks
- Full Face Masks
- Mask Reviews
- New Products